How To Do Daily Maintenance Of Laser Hair Removal Beauty Device?
This should be a topic of concern to many beauty salon owners. Laser hair removal beauty devices are of high value, and various beauty salons or spas invest more in them. Therefore, it is very important for beauty salons. Daily maintenance is also a problem that beauticians need to pay attention to:
1. Add water to the instrument, water outlet, and change water.
Add water time: before starting!
After the new laser hair removal beauty device arrived in the store, we suggested that you must add water for the first time, and then install the mobile phone after the water is full. Most beauty equipment or instruments need water to cool the system and dissipate heat.
Water filling method: Install a water filling funnel at the water inlet, open the overflow nut, and pour water into the water filling funnel until it overflows, that is, the instrument is full of water. Then you can turn on the power to operate the machine.
When discharging water, open the overflow and the water outlet until there is no more water flowing out of the water outlet.
The laser hair removal beauty device has a better effect of changing the water every 2-3 months, and pull out all the water inside. Please do not add any water during the working time of 2-3 months. Make sure all the water is fresh. The water quality is distilled water, not any alkaline mineral water.
2. Caring for water quality:
Any laser operator does not read the user manual before operating the laser. So when an emergency comes, they don’t know how to deal with it. Therefore, please read the instructions or manuals carefully before proceeding with treatment.
3. During the transportation of the instrument, the water must be cleaned and packaged.
In some mini salons or clinics, maybe you don’t have enough equipment to do door-to-door service. So you have to take one device to many different places. But please note that each device must be cleared the water out before transportation. Each device has an electronic system and a water cooling system, the upper part is the electrical part, and the bottom part is the water circulation method. So please be careful not to carry water in it. The next time you work again, it will easily cause the control board to burn out or the laser handle to break.
4. The water filter is replaced every 6 months, and the ion filter is replaced every year.
The water cooling system is very important. When changing the water, you should ask a technician or professional engineer to clean it every 3 months. In addition, please don’t forget to replace the water filter PP and ion filter to make the waterway unblocked.
The instrument should be cleaned regularly and kept clean and dry. Please disconnect the power when not in use.
We are a laser hair removal machines supplier. Please feel free to contact us if you are interested in our products.
